
A hardness conversion chart helps engineers compare Rockwell, Brinell, and Vickers readings when working with different metal specifications. Each method measures a material's resistance to indentation, but uses a different indenter, test force, and measurement process.
Knowing how these scales relate makes it easier to review material certificates, check heat-treated components, and confirm whether a metal meets its specified hardness requirements.
Before comparing hardness values, it helps to understand how each testing method works. The main difference is how the indenter creates an impression in the material and how the resulting measurement is calculated.
The Rockwell test measures the depth of an indentation under an applied load. A testing machine applies an initial force, followed by a larger force, and measures the permanent change in indentation depth.
Two commonly used scales are:
Rockwell testing is popular in production environments because it provides quick readings without requiring an operator to measure the indentation under a microscope.
The Brinell test presses a tungsten carbide ball into the material under a specified force. The diameter of the resulting indentation is measured to calculate the hardness value. It is commonly used for castings, forgings, and larger metal components. The larger indentation helps assess hardness over a wider area, making it useful for materials with less uniform structures.
The Vickers test uses a diamond pyramid indenter pressed into the material under a controlled force. The two diagonals of the resulting indentation are measured to calculate hardness. Vickers testing works across a broad hardness range by using different test forces. It is particularly useful for thin sections, small components, surface treatments, and checking hardness changes across a material's cross-section.
Read more: What Is Thermal Shock Resistance?
The following table provides approximate equivalent values for non-austenitic steels, including carbon, alloy, and tool steels. It is based on ASTM E140, Table 1.
| Rockwell C (HRC) | Brinell (HBW) | Vickers (HV) |
| 20 | 226 | 238 |
| 25 | 253 | 266 |
| 30 | 286 | 302 |
| 35 | 327 | 345 |
| 40 | 371 | 392 |
| 45 | 421 | 446 |
| 50 | 481 | 513 |
| 55 | 560 | 595 |
| 60 | (654) | 697 |
| 65 | (739) | 832 |
Note: Values in parentheses indicate approximate Brinell equivalents outside the range normally used for Brinell testing. A dash indicates that no applicable equivalent is provided. These conversions apply to non-austenitic steels and may not be suitable for other metals or alloys.
For example, a steel component measuring 40 HRC has approximate equivalent values of 371 HBW and 392 HV. Engineers can use the table to compare readings across different hardness scales when reviewing material test reports. These values are estimates, not exact equivalents, and apply to the specified material group and testing conditions.
The right testing method depends on the material, component size, surface condition, and inspection requirements.
Consider the following factors:
For example, a large steel casting may be better suited to Brinell testing, while a thin hardened layer may require Vickers testing to assess its hardness without measuring too much of the underlying material.
Check out: Ductile-to-Brittle Transition Temperature
Although conversion tables make comparisons easier, different hardness tests do not measure the same material response. Several factors can affect the relationship between readings.
ASTM E140 and ISO 18265 provide standardized conversion relationships for specified material groups. These standards also explain the limitations of using converted values. When a drawing or customer specification requires a particular hardness scale, direct testing using that method is the preferred approach. A converted result should not automatically be treated as proof of compliance.
Hardness conversions help engineers compare test results across different stages of manufacturing and heat treatment. They are useful when reviewing material certificates, inspecting finished components, or comparing supplier reports.
For example, if a supplier reports a hardness of 392 HV while a customer's drawing specifies Rockwell C, engineers can refer to the hardness conversion chart to find its approximate equivalent of 40 HRC.
However, converted values should not replace direct testing when a specific hardness scale is required. Teams should use calibrated equipment, follow applicable standards, and record original test results alongside converted values.
You might like to know the Welding Heat Input Formula
AxiomHT provides industrial heat treatment expertise and technical support to help manufacturers achieve consistent processing results.
Contact our team to discuss your application and requirements.